机床产品
/Machine Tool Products
–
610-E5/610-H5 5-Axis Wood Operation Manual
How to Operate 21 Series Controller
–
•
•
•
•
•
•
•
•
•
•
•
-Absolute method
Use manual function moving the measuring tool to a reference point (Ex. Work piece table).
Measure every tool repeatedly.
Move the machining tool to the reference position, clean all the relative coordinate.
Move the tool to the Z-coord code zero position, set it to G54.
If tool break during machining so we need change a new tool, we must touch the reference position
first, and then the Z coordinate value is tool length.
Tool Tip Measure
Function
Measuring different tool No. tip position. Because the trigger position of tool alignment equipment is
fixed, user can use different tool tip position key in the workpiece coordinate system for the reference
of tool length offset. You must check this machine has tool alignment equipment.
Operation Method
Offset/Setting
→
Tool Tip Measure
Auto Tool Function
Function
Z coord. Auto Tool Function is to measure different tool No. by tool alignment equipment. Because the
trigger position of the tool alignment equipment is almost the same. User can key in different tool No. tip
position into workpiece coordinate for the tool length offset setting, please this machine is equipped with
tool alignment equipment.
Operation description
Offset/Setting
→
Tool Tip Measure