Synrad p250, User Manual, Page: 77 / 106

SET YOUR COMPUTER’S STATIC IP ADDRESS PAGE | 77
Figure 4-39 Windows Features dialog.
4 A progress bar window will appear while the TFTP Client feature is being activated. When the
window closes, continue with the next section.
5 Restart this computer.
Set your computer’s static IP address
The exact steps may vary depending on your operating system.
1. Disconnect the computer from your local network by removing any networking cables.
2. In the Windows Control Panel,
double-click Network and Sharing Center
.
3. In the Network and Sharing Center dialog, c
lick the Local Area Connection
option.
4. In the Local Area Connection Status dialog,
click the Properties button
.
5. In the Local Area Connection Properties dialog (Figure below), select
Internet Protocol Version 4
(TCP/IPv4) and click the Properties button
.
Figure 4-40 Local Area Connection Properties dialog.
6. In the Internet Protocol Version 4 (TCP/IPv4) Properties dialog (see prior figure), select “
Use the
following IP address
:” and enter the following information:
IP Address: 192.168.50.100
Subnet Mask:
255.255.255.0