Synrad p250, User Manual, Page: 73 / 106

EVENT LOG PAGE LAYOUT PAGE | 73
Configure IP Address link:
Click this link to change the laser’s factory-default IP address (192.168.50.50). See the Changing the
p250’s IP address section for details.
Event log page layout
Figure 4-35 p250 event log page.
To access the p250’s event log page (Figure above), open your web browser, type
“http://192.168.50.50/service.html” (without the quotes,) and then press Enter. The event log page opens
and displays information recorded over the life of the laser. This information includes power-on cycles as
well as total on-time/total lase time; maximum values for voltage, current, temperature, and humidity;
and the number of times that various fault conditions have occurred. Refer to the home page for a
display of currently active faults if any exist.