SynOptics SYNBIOSIS aCOLyte3, User Manual

Page: 88 / 110

Working with results
The identifier, comment and/or dilution will be updated for the result and if you have changed
the dilution, values depending on the dilution will also be updated. An E flag will appear in
the Flags column showing the result has been edited.
Saving changes to results
To save any changes you have made to a result on the Edit Result tab and/or the Editing Plate
panel (see
Editing plate measurements
, page 78):
Press
Note Any changes you have made to a result will be lost if you move away from the Edit Result tab
before saving them.
If required, you can view an audit history listing the changes you have made to the result –
see
Viewing the audit history of changes
, on the facing page.
Undoing and resetting changes
To undo all the changes made to a result on the Edit Result tab and the Editing Plate panel
(see
Editing plate measurements
, page 78) since the result was last saved (see
Saving changes
to results
, above):
Press
To reset the result to the original measurement value before any changes were made to it and
saved using the Edit Result tab:
Press
Note Changes made to the plate identifier, dilution or comment in the Editing Plate panel will not
be reset.
Deleting results
To delete the result(s) for a plate:
1. Select the Edit Result tab for the plate result – see Editing plate measurements , page 78.
2. Press
3. Save the change to the result (see Saving changes to results , above).
The result will be deleted from the Results table.
82 aCOLyte3 User Manual