SynOptics SYNBIOSIS aCOLyte3, User Manual

Page: 25 / 110

Creating the batch
to display the Plate Configuration dialog box:
If you are going to use the batch for spiral plates, go to Step c; otherwise, go to
Step b.
b. For pour plates:
i. Click on the Standard Plates tab if it is not already selected – see picture in
Step a.
ii. Press the appropriate radio button to specify whether the plates you are using are:
= circular
or
= rectangular.
iii. For a circular plate, enter the Diameter of the plate; for a rectangular plate, enter
the Dimensions.
iv. To choose the units for the Diameter or Dimensions, press the corresponding
units button to display the units menu
and select the required unit.
v. Enter the Sample volume you will be using.
aCOLyte3 User Manual 19