13
e)
If needed, partially unzip the rear part of the backrest cover to make handling easier.
f)
Make sure the backrest is fully locked by gently pushing and pulling on it. Backrest must
stay in pre-set position.
5.
Backrest Height Adjustment
a)
Remove the backrest upholstery from the rear and front side of the backrest (attached by
Velcro fasteners).
b)
Loosen the two hex bolts located on top-rear part of backrest (5).
c)
Loosen the two plastic nuts on the rear side of backrest (6).
d)
Set the height of the backrest by lifting or pressing down on it.
e)
Properly tighten all hex bolts and plastic nuts and reinstall the backrest upholstery.
6.
Footrest Angle Adjustment
a)
Hold the footrest (13) firmly.
b)
Release the footrest angle-adjustment lever (20).
c)
Set the footrest to the desired angle.
d)
Tighten the lever properly to secure it into position.
7.
Footrest Height Adjustment
a)
Loosen the two hex bolts located on rear side of footrest slider bar (22).
b)
Set the footrest height to the desired position.
c)
Properly retighten both hex bolts.
8.
Footrest Angle Adjustment
a)
Loosen the two hex bolts located under the footrest (23).
b)
Set the angle of the footrest by pulling or pushing on the footrest angle- adjustment slide
plate (24).
c)
Properly retighten both hex bolts.
9.
Footrest Velcro Lock/S Adjustment
The Velcro security band is a safety device that prevents the footrest from folding inward.
a)
Tighten and fasten the Velcro security band located under the footrest (25) to ensure the
footrest position is secured.
Summary of Contents for TOM5 STREETER
Page 1: ... USER GUIDE TOM5 STREETER ...
