Synetik ErgoCare TOM5 STREETER User Manual Download Page 2

Page: 2 / 33

Table of Contents

.............................................................................................................................. 3

Warranty

.................................................................................................................................... 4

Safety and Warning Notes

........................................................................................................ 5

Transportation

........................................................................................................................... 6

Overview of the Tom5 Streeter

................................................................................................ 7

Technical Specifications

............................................................................................................ 8

Configuration

.............................................................................................................................. 8

Box Contents

............................................................................................................................... 8

Unboxing the Tom5 Streeter

....................................................................................................... 9

Assembling the Tom5 Streeter

................................................................................................. 9

Unfolding the Stroller-style Wheelchair Frame (without the seat)

......................................... 9

Fitting the Seat in the Forward-facing Position

....................................................................... 9

Fitting the Seat in the Rear-facing Position:

.......................................................................... 10

Lateral Protector Installation

................................................................................................. 10

5-Point Belt Installation

......................................................................................................... 11

Padded Frame Cover Installation

.......................................................................................... 11

Adjustment

............................................................................................................................... 12

Seat-unit Tilt-in-space

................................................................................................... 12

Seat-depth Adjustment

.................................................................................................. 12

Seat-base Width Adjustment

......................................................................................... 12

Backrest Angle Adjustment

........................................................................................... 12

Backrest Height Adjustment

.......................................................................................... 13

Footrest Angle Adjustment

............................................................................................ 13

Footrest Height Adjustment

.......................................................................................... 13

Footrest Angle Adjustment

............................................................................................ 13

Footrest Velcro Lock/S Adjustment

.............................................................................. 13

Daily Usage

............................................................................................................................... 14

Parking Brake

........................................................................................................................ 14

Swivel Lock

........................................................................................................................... 14

Handle Height Adjustment

.................................................................................................... 14

Unfolding the Stroller (with the Seat)

................................................................................... 15

Folding the Stroller (with seat attached)

................................................................................ 15

Summary of Contents for TOM5 STREETER


































Search results

Summary of Contents for TOM5 STREETER

Reviews:

Related manuals for TOM5 STREETER

Brands by name

Popular brands

Synetik ErgoCare TOM5 STREETER, User Manual

Search results

Summary of Contents for TOM5 STREETER

Reviews:

Related manuals for TOM5 STREETER

Brands by name

Popular brands