12
Adjustment
Before placing the child in the
stroller
, adjust the height of the backrest, the depth and the width of
the seat and install the desired accessories.
1.
Seat-unit Tilt-in-space
a)
Unzip the right padded frame cover (27) partially from bottom upwards to be able to
touch the reclining lever (pic.5).
b)
Hold the seat backrest firmly with one hand.
c)
Pull the seat tilt-in-space lever (11) with your other hand and set the desired position of
the seat (pic.5). Release the lever and rezip the padded frame cover.
2.
Seat-depth Adjustment
a)
Remove the seat base upholstery from the seat base (attached by Velcro fasteners).
b)
Loosen the two hex bolts (21) located under the mid-frontal part of seat using the hex
key.
c)
Loosen, by hand, the four plastic adjustment nuts located under the seat (19).
d)
Set the desired seat depth by pulling or pushing the front end of the seat.
e)
Properly tighten all hex bolts and plastic nuts and reinstall the seat-base upholstery.
3.
Seat-base Width Adjustment
a)
Remove the seat base upholstery from the side plates.
b)
Loosen, by hand, the four plastic adjustment nuts located under the seat (19).
c)
Set the seat width by pulling or pushing the side plates.
d)
Properly tighten all plastic nuts and reinstall the side panel upholstery.
4.
Backrest Angle Adjustment
a)
Hold the seat backrest firmly.
b)
Loose backrest recline-adjustment lever (7).
c)
Set the backrest to the desired angle.
d)
Tighten the lever properly.
Summary of Contents for TOM5 STREETER
Page 1: ... USER GUIDE TOM5 STREETER ...
