PRX-40B
8
4.3
Mounting the unit
1.
Select a location for the terminal using the following guidelines for finding the best location:
2.
Hold the mounting template to the wall and mark the places to drill holes for the screws and cables.
3.
Drill the holes for the connection cable and screws (with 6mm. drill bit).
4.
Inset the screw anchors for either plaster or concrete, as needed.
5.
Thread the cable through the wall and connect to external components as needed.
See the
Connect wires
section below for cable connection according wire color coding.
6.
Mount the panel to the wall and adjust it so that it is straight and the cable is in place.
7.
Slide the unit
downward
onto to the mounting panel.
The hinges at the side of the panel (1) should slide into the track of the mounting panel (2).
8.
Once the unit is in place you can screw the security screw, connecting between the panel and the
unit, at the top of the unit and panel.
1
2
