Back to Table of Contents
35
Delete list:
After entering set-up mode key-in code 23 (Delete card by keyboard) and key-in all irrelevant cards.
After each keyed-in card number 2 short beeps will indicate that the number was deleted successfully.
After keying-in all card numbers press 7&8 simultaneously (mandatory) (press
Enter
in terminals
that consist of an
Enter
key) in order to revert to normal mode.
1.2.3 Using Card
Build list:
After entering set-up mode key-in code 20 (Insert card to list by card) and swipe all relevant cards.
After each swiped card 2 short beeps will indicate that the number was registered successfully. After
swiping all cards press 7&8 simultaneously (mandatory) (press
Enter
in terminals that consist of an
Enter
key) in order to revert to normal mode.
Note: In set-up code 12: operation mode no. 4 - card and pin code, the user must swipe the card and then key-in the code (a 4 digit code).
Delete list:
After entering set-up mode key-in code 21 (delete card by card) and swipe all irrelevant cards. After
each swiped card 2 short beeps will indicate that the number was deleted successfully. After swiping
all cards press 7&8 simultaneously (mandatory) (press
Enter
in terminals that consist of an
Enter
key) in order to revert to normal mode.
Note: Whenever a task is completed successfully, a LED flashes and the buzzer beeps.
1.2.4 By index
Insert cards:
After entering set-up mode, key-in code 24 (Insert card by Index) and key-in a 4 digit index, swipe
card. 2 short beeps will indicate that the number was registered successfully. After swiping all cards
press 7&8 simultaneously (mandatory) (press
Enter
in terminals that consist of an
Enter
key) in
order to revert to normal mode.
Delete cards:
After entering set-up mode key-in code 25 (delete card by index) and key-in a 4 digit index. 2 short
