User’s Manual
Synaccess Networks, Inc.
www.synaccess-net.com
(760) 930 – 0473 Page 38 of 46
you might experience data loss when data exchange rate is high. This is because data flow
from the system’s Ethernet port is subject to the congestion condition of LAN traffic.
Data Bit:
•
Supports 7 or 8 bits.
•
Supports 1 or 2 bits.
•
Supports Even, Odd or None.
•
Flow Control is hardware handshaking using CTS/RTS signals on the connectors. Please
for information about RS232 connector pin assignments.
•
Assign a name for the port.
Hel
Use the command “/sset n” to select serial port “n” to be active.
mand “/srsv n” to reserve a serial port for your account. You must login to
Stop Bits:
Parity Bits:
Flow Control:
see Appendix A
Port Name:
pful Info:
•
•
Use the com
the system first.
•
Use the command “/sunrsv” to un-reserve a serial port under your account.