User’s Manual
Synaccess Networks, Inc.
www.synaccess-net.com
(760) 930 – 0473 Page 27 of 46
•
Web Access:
Enable or disable web access to the system. Default to enable.
•
Telnet Access:
Enable or disable Telnet access to the system. Default to enable. Only one active Telnet
session is permissible.
•
Control command via Emails:
Enable or disable this access method. When it is enabled, you need to make sure you also
have completed POP/SMTP server and email receiving and sending addresses. See
“TCP/IP Network Configuration” setup menu for detailed information how to setup email
accounts. Default to disable.
•
SNMP Agent Enabling:
Enable or disable SNMP agent on the system. If the system SNMP Agent is enabled, it
collects and stores management information and makes this information available to NMS
using SNMP. Please see Section 2.5 for a list available MIB objects that the system
supports. Default to disable.
•
SNMP Trap Enabling:
Enable or disable Trap sending. If this option is enabled, Traps are sent if there is a power
reboot command execution on the system. Default to disable.
Note: you must enable the above
SNMP Agent
setting. Otherwise, enabling Trap setting
will not take effect.
•
SNMP Trap Receiver IP Address:
Enter Trap Monitoring receiver IP address.
•
Save and Quit:
Save current configuration data and return to previous configuration menu.