5
1) Turn shower handle counterclock-
wise approximately 1/4 turn to put
valve in cold position.
Operation (Temperature Control)
2) Turn shower handle counterclock-
wise approximately 1/2 turn to put
valve in warm position.
3) Turn shower handle counterclock-
wise approximately 3/4 turn to put
valve in hot position.
Installation
9) Place mounting plate (M) in po-
sition, mark and drill 3/16” holes
for tile anchors (M1), 5/16” holes
for drywall anchors (M2). Install
anchors.
10) Remove cover of hand shower
cradle (N). Install cradle and
mounting plate (M). Secure with
three screws (O). Replace cover
on hand shower cradle.
4
3
2
1
N
O
M
11) Attach hand shower (L) to hose (S).
Attach hose (S) to vacuum breaker
(R). Connect vacuum breaker (R)
to wall ell (P). Turn clockwise to
tighten.
2
S
1
P
R
3
3
L
2
4
S
Operation (Diverter Control)
2
3
1
M
M2
4
M1
M2
M3
Note:
For dry wall 1/2” thick or less,
insert anchor tool (M3) into drywall
anchor (M2) to secure behind wall
prior to installing wall cradle.
POSITION 1
POSITION 2
1) Cartridge is factory set to divert
to function 1.
2) Turn handle to position 2 to divert
to function 2.
3) Turn handle to position 3 to share
functions 1 and 2.
POSITION 3
Note:
In this position there is no detent.