PAGE 9
5) Back Rest height.
Before setting the height it is
necessary to open the top of the
back shell as illustrated.
To do this lift the top front edge
off the Velcro and hinge the shell
back. This will expose the back
rods of the chair.
After adjustment re-fit the cover.
The back height is adjusted by loosening the clamp screws
arrowed. Once loose, lift the extending back rods up by holding
on to the chair handles and lifting upwards. They can then be
raised or lowered as required. When at the correct height,
tighten the clamps.
On the side of the right hand upright tube there are calibration
markings. When adjusting the chair compare these settings
with those on the settings chart supplied with the chair. As the
user’s requirements change record the new settings for future
reference.
Summary of Contents for Large
Page 23: ...PAGE 23 NOTES ...
