Issue 2: Sep 99
TMSL 097-44018-26
Page 63
COMMAND CODE: INIT-SYS
PURPOSE
INITIALIZE SYSTEM
This command either deletes the card database, resets the MIS card, changes to the alternate MIS card
program, or resets all parameters to the factory settings and deletes the card database.
INPUT FORMAT
INIT-SYS:[<tid>]:<aid>:<ctag>::<ph>;
Caution: Before using the INIT-SYS command with a <ph> of 4 or 5 with an aid of MIS, ensure
that section 5 of switch SW1 on the MIS card is in the up (ON) position. Failure to observe this
caution may result in the loss of all card database information in the MIS card.
The parameter values in the table below are as follows:
a
= 1–2
parameter
value
meaning
aid
MIS
MIS card
DCIM-a
DCIM card