TMSL 097-44018-26
Issue 2: Sep 99
Page 52
COMMAND CODE: ENT-EQPT
PURPOSE
ENTER EQUIPMENT
This command enters the card into the MIS card database, and puts the card in service according to the
switch settings on the card. The card switch settings can be overridden by TL1 command. See note below.
Note:
For EA10, EA10M, EA20, EA20M, TO-EA5, TOTA-5, and TOTA-M cards, if section 8 of switch
SW1 is ON:
• The outputs are disabled upon power-up.
• The ENT-PORT, RST-EQPT, and RST-PORT commands must be used to enable the outputs.
INPUT FORMAT
ENT-EQPT:[<tid>]:<aid>:<ctag>;
The parameter values in the table below are as follows:
a
= 1–2
b
= 1–11
c
= 1–12 (1–10 for TOTA-5 &TOTA-M)
EXAMPLE
Input:
ENT-EQPT::MRC-2:134;
Response:
SANJOSE-114 1997-12-08 15:04:13
M
134 COMPLD
;
This example, tagged as command 134, enters and restores the MRC card in slot 2, and enters and re-
stores all ports on the MRC card, with all factory settings.
aid
meaning
CLK-a
Clock card
DCIM-a
DCIM card
GTI-a
GTI card
LTI-a
LTI card
MCA
MCA card
MRC-a
MRC card
PSM-b
PSM card
TO-c
timing output card
