Symmetricom GoWide 9.2, User Manual

Page: 67 / 134

1
GoWide 9.2 G.shdsl Bridge/Router – User Manual
67
Router Mode Configuration
097-91023-01 Issue 1: February 2002
2
5
3
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
4
4
WAN Port Configuration using IPOA
5HIHUWR3URFHGXUH/IRULQIRUPDWLRQRQFRQILJXULQJWKH:$13RUWIRU,32$
Procedure L. Configuring WAN Port Using IPOA
Step Procedure
1
Select IPOA in the System Menu (Figure 41).
2
Enter the VPI value in the VPI field.
3
Enter the VCI value in the VCI field.
4
Select the Quality of Service type: UBR (default setting), CBR , or VBR . A pop-up screen appears. Enter the
appropriate information.
5
Enter the values for Local IP , Subnet Mask , and Gateway in the respective fields.
6
Select either Set as Default Route , Edit Routing Table , or RIP under Routing Table ( RIP Allowed is the default
setting).
7
If NAT is desired, click the NAT box under Advanced .
8
Click the Apply button if all data is correct.
End of Procedure