Symmetricom GoWide 9.2, User Manual

Page: 15 / 134

1
GoWide 9.2 G.shdsl Bridge/Router – User Manual
15
Product Description
097-91023-01 Issue 1: February 2002
2
5
3
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
GoWide 9.2 Rear Panel
)LJXUH VKRZVWKH*R:LGH5HDU3DQHO
Figure 2. GoWide 9.2 Rear Panel
7KH*R:LGHUHDUSDQHOFRQQHFWRUVDQGVZLWFKHVDUHGHVFULEHGLQ7DEOH %
Table B. Rear Panel Connectors and Switches
Nomenclature Explanation
POWER SWITCH Allows GoWide to be turned ON or OFF.
AC POWER A receptacle for the power cord.
RESET SWITCH Returns GoWide to factory settings.
DSL PORTS RJ-11 ports for DSL connection which require RJ-11 cables (provided).
CONSOLE PORT For administrative use only.
ETHERNET PORTS Allows GoWide to establish a connection directly to a computer from any of its four
ports. An RJ-45 straight cable is provided and the modem has auto-crossing capability.
Therefore, connection to a computer or a hub can be made without changing the RJ-45
cable. Each of the four ports has two LEDs. The green LED remains on when linked to an
active Ethernet port and will blink when there is traffic. The yellow LED indicates the
speed utilized by GoWide. It will be lit when the speed is at 100 Mb/s and will be off
when the speed is 10 Mb/s.
POWER
SWITCH
AC
POWER
RESET
SWITCH
DSL
PORTS
CONSOLE
PORT
ETHERNET
PORTS