Symmetricom GoWide 9.2, User Manual

Page: 39 / 134

3
GoWide 9.2 G.shdsl Bridge/Router – User Manual
39
Bridge Mode Configuration
097-91023-01 Issue 1: February 2002
2
5
3
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
WAN Port Configuration using PPPoE Relay
5HIHUWR3URFHGXUH)IRULQIRUPDWLRQRQFRQILJXULQJWKH:$13RUWXVLQJ333R(
5HOD\
Procedure F. Configuring WAN Port Using PPPoE Relay
Step Procedure
1 Select PPPoE Relay in the System Menu (Figure 18).
2 Enter the VPI value in the VPI field.
3 Enter the VCI value in the VCI field.
4 Select the Quality of Service type: UBR (default setting), CBR , or VBR . A pop-up screen appears. Enter the
appropriate information.
5 Select the Encapsulation type: LLC , VCMUX , or Learning (default setting).
6 Select the HDLC Header type: Enable , Disable , or Learning (default setting).
7 Click the Apply button if all data is correct.
End of Procedure