Trou ble shooting
If the PTC Does Not Start:
•
Charge the bat ter ies if they are nickel-cadmium; re place
them if they are al ka line.
•
Re place the nickel-cadmium bat ter ies.
•
Check any ac ces sory con nec tions.
If the PTC Shows the Mes sage “BACKUP BAT TERY
FAULT”:
•
Make sure the backup bat tery is switched to the ON po si -
tion. If the PTC still will not turn on, con tact your
Symbol ser vice rep re sen ta tive.
If the Bar-Code Reader Does Not Read a La bel:
•
Try scan ning across the top or bot tom of the bars in the
la bel.
•
Make sure the bar-code reader is con nected se curely to
the PTC-710.
•
Wipe off the bar-code la bel.
•
Wipe off the tip of the pen cil wand.
22 / The PTC-710
