Symbol PDT 1100, Product Reference Manual

Page: 114 / 124

D-2
PDT 1100 Terminal Product Reference Guide
Reload the battery to
restart! 02 During execution, the
System Program received
an invalid command code. Unload and reload the alkaline batteries,
or the battery pack, then power on.
Flash ROM error!
Contact your
administrator The system failed to write
onto flash ROM. The
terminal beeps five times,
then turns itself off. Turn on the power again. If this occurs
frequently, contact your nearest Symbol
Support Center.
RTC error! Contact
your administrator The system failed to set the
date and time to the real
time clock (RTC) or failed to
read out from it. Turn on the power again. If this occurs
frequently, contact your nearest Symbol
Support Center.
System error!
Contact your
administrator. Note
the error drive
(DRIVE X). An error is found in the
system area of RAM or
flash ROM during the
memory backup test, which
is activated when the
power is turned on. This
error message also
appears the first time
power is applied after
purchase. Initialize the PDT 1100. If the error
persists after initialization, contact your
nearest Symbol Support Center.
Application error!
Contact your
administrator. An error occurred in the
user area of RAM or flash
ROM during the memory
backup test activated when
an application program is
initiated. Operate the PDT 1100 in System mode,
and test files by executing “8 FILE” in the
TEST menu. Download or delete
defective files marked with an asterisk
(*), then run the application program
again.
Resume Failure!
Program restarts
automatically.
When the power was
turned off, the system failed
to save resume data,
although the resume
function set to ON. The PDT 1100 displays this message for
2 seconds, then runs the execution
program from start-up.
Table D-1. System Error Messages (Continued)
Error Message Problem Possible Solution