manualshive.com logo in svg

Symbol LS 4071, Product Reference Manual

Share
Download
Symbol LS 4071 Product Reference Manual Download Page 133

5-89

Parameter Menus

RS-232C Parameters

Software Handshaking

This parameter offers control of the data transmission process in addition to, or 
instead of, that offered by hardware handshaking. There are five options.

If Software Handshaking and Hardware Handshaking are both enabled, 
Hardware Handshaking takes precedence.

None

When this option is selected, data is transmitted immediately.

NONE

ACK/NAK

When this option is selected, after transmitting data, the base expects either an 
ACK or NAK response from the host. Whenever a NAK is received, the base 
transmits the same data again and waits for either an ACK or NAK. After three 
unsuccessful attempts to send data when NAKs are received, the base issues an 
error indication and discards the data.

The base waits up to the programmable Host Serial Response Time-out to 
receive an ACK or NAK. If the base does not get a response in this time, it issues 
an error indication and discards the data. There are no retries when a time-out 
occurs.

ACK/NAK

Summary of Contents for LS 4071









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands