- 7 -Model 5030 Access Port Quick Reference Guide DRAFT V3
Overview
The WSAP 5030-xxx-WW system is available in an 802.11a, 802.11b or 802.11a/b radio
configuration. Configurations include internal antennas or external antenna connectors. External
antennas are optional (see add-on options addendum for installation of options). Verify model
number of purchase order matches the packing list model number and the device model number
in the box. The WSAP 5030 system has two RJ-45 connecters (
10/100 Ethernet ports LAN
and ACC) that connect to the Symbol Technologies Wireless LAN Switch host and a
daisy chained device.
The WSAP supports any vendors 802.3af compatible switch and Symbol’s POE.
LED Indicators
The top panel LED activity indicator (viewable via light pipe when installed above a ceiling)
provides a status display indicating error conditions, transmission and network activity for 802.11
a/b (if applicable).
802.11a Activity Led Amber
Booting
LED flashes three times per second while firmware is loading.
Normal
LED is on steady unless there is radio traffic and then it flashes with the radio
traffic.
Error
LED flashes once per second if an error prevents the unit from operating
normally.
802.11b Activity Led Blue
Booting
LED flashes three times per second while firmware is loading.
Normal
LED is on steady unless there is radio traffic and then it flashes with the radio
traffic.
Error
LED flashes once per second if there is an error that prevents the unit from
operating normally.
Mounting hardware included:
•
Horizontal or vertical flat surfaces (such as desk tops, walls or ceilings)
•
Plenum rated above or below ceiling configurations (above ceiling installation hides the unit
and cables from visual access).
NOTE:
Suspended ceiling notes or warnings apply to all installations where the unit is mounted
directly (above or below) to the suspended ceiling tile. The Access Port comes with a safety wire
tie point. The safety wire is customer supplied.