- 4 -Model 5030 Access Port Quick Reference Guide DRAFT V3
To the Installer
This guide is intended for the technician responsible for installing Symbol Technologies IEEE
802.11a Access Port. It is assumed that the technician is familiar with Ethernet LAN-based
networking, terms and concepts. The installing technician should also have a working knowledge
of mechanical assembly as well as an understanding of local building codes.
Purpose
The purpose of this document is to provide specifications, features and guidelines for the installer
to use during installation. This document does not give site-specific installation instructions. Refer
to site-specific documentation, derived from site survey and site network analysis, for detailed
installations.
Document Conventions
Before operating any equipment, review this document for any hazards associated with
installation and use of the device. Also, review standard practices for preventing accidents.
Note: Indicates tips, hints and special requirements.
Caution: Care is required. Disregarding cautions can result in data loss or equipment damage.
Warning: Indicates a potentially dangerous condition or procedure that only Symbol-trained
personnel should attempt to correct or perform.
Warnings:
•
Only Symbol Technologies trained and qualified personnel are allowed to install this
equipment.
•
Read all installation instructions and site survey reports and verify correct equipment
installation before connecting the system to its power source.
•
Remove any jewelry (rings, watches, necklaces, etc.) while installing this equipment.
•
Verify that any device connected to this unit is properly wired and grounded.
•
Verify connecting power circuits have appropriate overload protection.
•
Attach only approved cables to this device.
•
Verify adequate ventilation around the device and that ambient temperatures meet
equipment operation specifications.
•
Verify uninterruptible power sources, if equipment is carrying emergency traffic.
•
Do not use the surface assembly for plenum-rated ceiling mounting.