Symbol Hotspot LS 2100, Product Reference Manual

Page: 24 / 350

1-5
Getting Started
Connecting a Synapse Cable Interface
Note: See the Synapse Interface Guide provided with your Synapse cable
for detailed setup instructions.
Symbol’s Synapse Smart Cables enable interfacing to a variety of hosts. The appropriate
Synapse cable has the built-in intelligence to detect the host to which it is connected.
Figure 1-3. Synapse Cable Connection
1. Plug the Synapse adapter cable (p/n
25-32463-xx)
into the bottom of the scanner,
as described in Installing the Interface Cable on page 1-3.
2. Align the ‘S’ on the Synapse adapter cable with the ‘S’ on the Synapse Smart Cable
and plug the cable in.
3. Connect the other end of the Synapse Smart Cable to the host.
Removing the Interface Cable
To remove the interface cable:
1. Unplug the installed cable’s modular connector by depressing the connector clip
with the tip of a screwdriver.
2. Carefully slide out the cable.
3. Follow the steps for Installing the Interface Cable on page 1-3 to connect a new
cable.
Synapse adapter cable
To scanner
Synapse Smart Cable
To host