manualshive.com logo in svg

Symbol Hotspot LS 2100, Product Reference Manual

Share
Download
Symbol Hotspot LS 2100 Product Reference Manual Download Page 103

7-2

LS2100/LS2108 Product Reference Guide

Connecting a USB Interface

Figure 7-1.  USB Connection

The scanner connects with USB capable hosts including:

•

Desktop PCs and Notebooks

•

Apple™ iMac, G4, iBooks (North America only)

•

IBM SurePOS terminals

•

Sun, IBM, and other network computers that support more than one keyboard.

The following operating systems support the scanner through USB:

•

Windows 98, 2000, ME, XP

•

MacOS 8.5 and above

•

IBM 4690 OS.

The scanner will also interface with other USB hosts which support USB Human Interface 
Devices (HID). For more information on USB technology, hosts, and peripheral devices, 
visit 

www.symbol.com/usb

.

To set up your scanner:

1.

Connect the USB interface cable to the bottom of the scanner, as described in 

Installing the Interface Cable

 on page 1-3.

USB Series A Connector

Interface cable

Summary of Contents for Hotspot LS 2100































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands