6
C
R
D
2
7
0
0
-
4
0
0
0
E
E
t
h
e
r
n
e
t
C
r
a
d
l
e
Static Mode
If there is no DHCP server on your network, the cradle must be
manually configured with IP addresses and other network-related
information. This configuration is performed from the debug
monitor (i.e., E86MON) by running the EFlasher utility. To enter the
debug monitor:
1. Connect a null modem cable to a CRD1700-4000S host con-
nector cable (p/n 70245-001). The null modem end should
be connected to a COM port on the PC, and should be set to
run at 115200 bps, 8N1, with XON/XOFF flow control and
ASCII file transfer protocol, using a terminal emulator soft-
ware, such as ProComm
TM
or Hyperterminal
TM
.
2. Connect the modular end to the expansion port of the
CRD2700-4000E.
3. Power up the CRD2700-4000E. Before the power up LED
sequence begins, type ‘a’ from the terminal program to enter
the E86Mon. The following screen displays
:
4. Next, load the EFlasher utility into the cradle’s RAM by typing
l2. Press Enter. The following screen displays
:
Welcome to EtherCradle Monitor version x.xx! (?<Enter> for help)
er86mon:
er86mon:l2
er86mon:
