Symantec NORTON GHOST User Manual Download Page 34

Page: 34 / 80

Chapter 3:

Using Norton Ghost

Warning:

Choose carefully as this is the partition that is going to be

overwritten.

Check the details displayed and ensure the correct options have
been selected. Do one of the following:

■

Select Yes to proceed with the partition copy.

If you need to abort the process use Ctrl-C, but be aware that this
leaves the destination drive in an unknown state.

Warning:

Only select Yes if you are really sure you want to

proceed. The destination partition will be completely overwritten
with no chance of recovering any data.

■

Select No to return to the menu.

When the partition copy is complete, reboot the destination
machine. Norton Disk Doctor, ScanDisk, or a similar utility can
then be run to verify the integrity of the destination partition.

Cloning from partition to image file

To clone a partition to an image file:

From the main menu, select Partition > To Image.

The Source Drive dialog box displays.

Select the source drive.

Summary of Contents for NORTON GHOST

















































































Search results

Summary of Contents for NORTON GHOST

Reviews:

Related manuals for NORTON GHOST

Brands by name

Popular brands

Symantec NORTON GHOST, User Manual

Search results

Summary of Contents for NORTON GHOST

Reviews:

Related manuals for NORTON GHOST

Brands by name

Popular brands