Symantec NORTON GHOST User Manual Download Page 32

Page: 32 / 80

Chapter 3:

Using Norton Ghost

Cloning partitions

Partition cloning procedures are accessed from the main menu. To specify
a transfer method, select one of the following:

■

Local

■

LPT > Master

■

NetBIOS > Master

The source and destination partitions must be correctly configured before
cloning partitions.

Cloning from partition to partition

A destination partition must be correctly configured before Norton Ghost
can clone another partition into it.

To clone from partition to partition:

From the main menu, select Partition > To Partition.

The Source Drive dialog box displays.

Select the source drive.

The Source Drive dialog box displays the details of every drive
Norton Ghost can find on the local machine. On selection of the
source drive, the Source Partition dialog box displays.

Summary of Contents for NORTON GHOST

















































































Search results

Summary of Contents for NORTON GHOST

Reviews:

Related manuals for NORTON GHOST

Brands by name

Popular brands

Symantec NORTON GHOST, User Manual

Search results

Summary of Contents for NORTON GHOST

Reviews:

Related manuals for NORTON GHOST

Brands by name

Popular brands