3
In the rear of the unit, locate the faulty power supply. The LED on power
supply is amber.
4
Turn off the power switch on the faulty power supply.
5
Unplug the AC cord from the faulty power supply.
6
Locate and loosen the two hand-tightened screws ("B" in the figure) that
secure the power supply in the frame.
7
Use the handle that is located between the fans ("A" in the figure) to pull the
power supply out of the bay.
8
Turn off the power switch in the replacement power supply.
9
Insert the replacement power supply into the bay and slide it into the bay
until it clicks.
10
Secure the power supply with the two hand-tighten screws.
11
Plug the AC cable into the socket.
12
Turn on the power switch.
Replacing an I/O module
This instruction describes how to replace a faulty I/O module in the Symantec
Storage Shelf.
65
Replacing Symantec Storage Shelf hardware
Replacing an I/O module