Symantec ALTIRIS INVENTORY 7.0 SP2 - FOR NETWORK DEVICES V1.0 Manual Download Page 58 | Manualshive

Page: 58 / 148

background image

WiseScript Editor Reference

58

z

Root
Select the parent key in which the new key is added.

z

Key
Enter the name of the new key. You can create multiple hierarchical keys at once by
separating them with backslashes, as in directory paths. (Example: Entering
NewDocument\Protocol\StdFileEditing creates the StdFileEditing key inside the
Protocol key, which is created inside the NewDocument key.) Any keys in the path
that do not exist are automatically created.

z

Value Name
Enter the name of a new named value.

z

Data Value
The data for the value. If the Data Type (below) is Double Word (DWORD), the
data should be in decimal notation. To insert multiple lines of data here, press
Ctrl+Enter to begin a new line.

z

Data Type
Select the type of data contained in the named value. Available types are listed
below. The associated Windows API data types are in parentheses.

String
(REG_SZ prefix) Indicates that a value entry is an expandable string. To embed
a variable name, (such as %WIN%), enclose it with double percents
(%%WIN%%). If you enclose it in single percents, then the variable name is
expanded to its actual value. This allows Windows system variables to be
embedded.

Unexpanded String
(REG_EXPAND_SZ prefix) Identifies a value entry as an unexpanded data
string. To embed a variable name, (such as %WIN%), you must enclose it with
double percents (%%WIN%%). If you only enclose it in single percents, then
the variable name is expanded to its actual value. This allows Windows system
variables to be embedded.

Multiple Strings
(REG_MULTI_SZ prefix) Identifies a value entry as a multiple string. These are
multiple pieces of text, separated by carriage returns.

Double Word
(REG_DWORD prefix) Identifies a value entry as a 32-bit (DWORD) entry.

Binary/Hex
(REG_BINARY prefix) Identifies a value entry as binary. Each byte should be
separated by at least one blank space. For instance: AD 30 C0 A9 40 20 A8 FC
4C 00 08.

None
This is provided for compatibility with SMS Installer installations. It behaves the
same as the binary data type.

z

Append Data
Normally, if you set a registry key to a new value and the key already exists, the
value is replaced with the new value. If you want to append the new data to an
existing multiple strings value instead of replacing it, mark this check box. This
option is unavailable unless Multiple Strings is selected in the Data Type drop-
down list.

«
...
56
57
58
59
60
...
»

Summary of Contents for ALTIRIS INVENTORY 7.0 SP2 - FOR NETWORK DEVICES V1.0





















































































































































Reviews:

No comments

Related manuals for ALTIRIS INVENTORY 7.0 SP2 - FOR NETWORK DEVICES V1.0

Brand: Adobe Pages: 822

Brand: Waves Pages: 20

Brand: Valgrind Pages: 319

PCANYWHERE - V12.1

Brand: Symantec Pages: 321

COMPUTER OPERATED VIDEO CAMERA SYSTEM

Brand: KINGDOM Pages: 21

Brand: Franklin Pages: 32

Brand: GRASS VALLEY Pages: 2

Brand: GRASS VALLEY Pages: 24

AURORA INGEST - S AND UPGRADE INSTRUCTIONS V7.1

Brand: GRASS VALLEY Pages: 66

Brand: Qualcomm Pages: 192

ANTI-VIRUS 5.5 - FOR MICROSOFT EXCHANGE SERVER...

Brand: KAPERSKY Pages: 143

Brand: ACD Systems Pages: 232

Brand: TC Electronic Pages: 24

Brand: Fender Pages: 3

Brand: Lenovo Pages: 2

ThinkStation D20

Brand: Lenovo Pages: 4

Brand: Lenovo Pages: 2

Brand: Lenovo Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands