Symantec Altiris Barcode Solution 7.0, Manual

Page: 42 / 58

barcode, status and comments pulled into one asset. If the dataclasses on both
assets which were merged contains data, then the data from the last one uploaded
will be written to NS. For example, if asset 1 had manufacturer ‘ABC’ and another
asset with same barcode is uploaded with manufacturer ‘XYZ’, then the merged
assets will show manufacturer as ‘XYZ’.
You can merge multiple keys, but must ensure that all keys match.
For example, if you check Barcode and serial number and then you upload the
resource from a barcode device. The key only merges with an existing resource if
both the barcode and the serial number match.
These settings can be changed when needed. If you are not sure what you want
to do at this time, leave them at the default. To make a change, select the
checkboxes that you want and click Save Changes.
See “License Usage page” on page 40.
Add to Barcode Export List page
This page lets you add a specific resource to a synchronization profile.
See “Synchronization Profiles page: Synchronization tab” on page 40.
Barcode Solution Reports folder
Barcode Solution Reports folder lets you select from several reports that display
the results of data exchanges.
For more information, see topic about Reports in the Symantec Management
Platform Help.
Using Barcode Solution's User Interface
Add to Barcode Export List page
42