You must install the local SSIM Agent on all computers on which Symantec Mail
Security for SMTP is installed.
To install the local SSIM Agent on Windows
1
Ensure you are logged into the Symantec Mail Security for SMTP machine
on the console or via SSH as an administrative user.
2
Insert the Symantec Mail Security for SMTP product CD in the CD drive.
3
Launch a Command window, navigate to the
\Agents\
directory on the product
CD, and use the following command:
setup.exe [ -debug ] [-log] [-a{ProdID}] [-f{filename}] [-s{server}] [-p{port}] [-i{install path}]
where
-s{server}
specifies the hostname or IP of the management server, and
-i{install path}
specifies the destination path where the SSIM Agent will
be installed. If you omit this parameter, the SSIM Agent will be installed in
the default folder, which is
C:\Program Files\Symantec\SESA\Agent
(example:
setup.exe -s192.168.0.10
)
The installer runs and completes.
To install the local SSIM Agent on Linux/Solaris
1
Ensure you are logged into the Symantec Mail Security for SMTP machine
on the console or via SSH as root.
2
Navigate to the
/Agents/
directory on the product CD and copy the
Unix.tar.gz
file to a temporary directory on the hard drive.
3
After you have copied the file, decompress the SSIM Agent directory using
the following commands:
gunzip Unix.tar.gz
tar xvf Unix.tar
65
Integrating Symantec Mail Security with Symantec Security Information Manager
Installing and configuring event logging to the Information Manager