■
The default group policy includes all users, and specifies use of default filtering
policies for spam, suspected spam, virus, content compliance, and end user
settings.
■
The default spam policy is to modify the subject line by prepending [Spam]
and deliver the message to the inbox, and only applies to inbound mail traffic.
■
The default suspected spam policy is to modify the subject line by prepending
[Suspected Spam] and deliver the message to the inbox.
■
The suspected spam threshold is set to 72 (see Symantec Mail Security for
SMTP Administration Guide for more information).
■
The default virus policy is to clean the message.
■
The default worm policy is to delete the message.
■
No default content compliance policies are in place.
■
No end user configuration capabilities are in place.
For more information on these policies and instructions on adjusting them to
meet your needs, see the Symantec Mail Security for SMTP Administration Guide.
Note:
With this release, the default action for an Unscannable verdict, including
those due to malformed MIME content, has been changed from markup to delete.
This was done to provide the strongest possible level of protection against external
threats. If desired, you can change this action on a per group basis. You may want
to change the default setting for unscannable messages if you are concerned about
losing important messages.
Testing Scanners
For instructions on testing Scanners, see the Symantec Mail Security for SMTP
Administration Guide.
Accessing the Control Center
Follow these instructions to begin using the Control Center.
43
Installing Symantec Mail Security for SMTP
Testing Scanners
