To specify administrator, local domain, and locale settings
1
On the Administrator Settings panel, specify an email address for the
administrator and click Next.
You can use the Control Center to specify that the system send alerts and
other information to this address after you have completed this procedure.
2
On the Local Domains panel, add the domains for which you accept incoming
mail.
You can also add specific email addresses.
To delete a domain or email address from the list, check it and click Delete.
3
For each domain or email address you add, optionally specify that messages
should be routed to a specific host and port.
You can optionally check Enable MX Lookup.
You can click Import to import a text file containing a list of local domains,
one domain per line.
4
Click Next.
The System Locale panel is displayed.
5
Specify the locale that Symantec Mail Security for SMTP should use for
formatting numbers, dates, and times, and then click Next.
If you are setting up a Control Center-only installation, you will now see the
Setup Wizard Summary panel. If you are setting up a Control Center and a
Scanner on the same machine, you will see the Mail Filtering panel, the first
panel in the Add Scanner Wizard.
6
Do one of the following:
■
If you are setting up a Control Center-only installation, review the
information on the Setup Wizard Summary panel. Click Back to make
changes, or Finish to complete. You must set up a Scanner before you can
filter mail.
To set up a Scanner on another machine you must install a Scanner on
that machine, and then follow the procedure described in
Setting up a
Scanner
.
■
If you are setting up a Control Center and a Scanner on this machine,
continue with
To specify mail filtering settings
in the next section.
To specify mail filtering settings
1
On the Mail Filtering panel, specify how you will use this Scanner.
35
Installing Symantec Mail Security for SMTP
Setting up
