4
1. Introduction
The D62S/D62S Advanced display is a simple and intuitive display unit made for connecting
1 or 2 Sylvac inductive probes (P12D-M8) to carry out measurement. Detection of probe
is automatic, and do not need any user operation.
The use of Sylvac inductive probes does not require connecting to the display unit,
this way it is not necessary to calibrate the D62S.
Connected probes are detected automatically, no operation by the user is required.
Basic measurements can be made (direct measurement with probe A or B, sum and
difference between probe A and B), as well as more complete measurements using the
D62S Advanced version (multiplication factor, 3-point measurements, etc.)
The screen can be split to show one or two displays. The D62S can make direct (static)
measurements.
Measurements can be made in comparison to a reference level, i.e. a benchmark.
The D62S Advanced version can also be used for measuring in dynamic mode (min,
max, delta, etc.)
Thanks to the many user-definable functions, the D62S is used in many control
applications.
The D62S display can be connected to a PC using its RS-232 and USB ports
A multifunctional footswitch (2 footswitches on the D62 Advanced) can also be connec-
ted to the device.
