4
Operating Instructions
Methane (CH
4
) Gas Detector
Item no: 2483186
1 Intended use
The product is a standalone methane (CH
4
) gas detector. The product will constantly monitor
gas levels and sound an alarm when combustible gas is detected.
Important:
■
This product will not detect other types of gases, steam, heat, or smoke.
■
This product cannot prevent explosions. It is only a warning indicator signalling a gas
leakage.
■
When the end of service light indicator [
Yellow: Service life
] lights up, disconnect the
power supply, remove the product from use, and then replace it with a new one.
■
Standard implemented: EN 50194-1:2009.
The product is designed for private use only.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Product
■
2x Screws
■
2x Dowels
■
Mounting bracket
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR
code shown. Follow the instructions on the website.
4 Symbols in this document
The symbol warns of hazards that can lead to personal injury. Read the informa-
tion carefully.
The symbol warns of dangerous voltage that can lead to personal injury by elec-
tric shock. Read the information carefully.
5 Symbols on the product
Protection class 2 (double or reinforced insulation, protective insulation).
Read the operating instructions carefully.
6 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
6.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
6.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
6.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
6.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
6.5 Mains cable
Do not tamper with power supply components. Risk of death by electric shock!
■
Always ensure proper connection.
■
Never use damaged power supply components.
■
Do not modify power supply components.
■
The mains outlet must be located near to the device and be easily accessible.
■
Never plug in or unplug the mains plug when your hands are wet.
■
Never pull the mains plug from the socket by pulling at the cable. Always pull it from the
mains socket using the intended grips.
■
Unplug the mains plug from the mains socket if you do not use the device for an exten-
ded period of time.
■
Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
■
Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put
under mechanical stress.
■
Avoid excessive thermal stress on the mains cable from extreme heat or cold.
■
Do not modify the mains cable. Otherwise the mains cable may be damaged. A dam-
aged mains cable can cause a deadly electric shock.
■
Do not touch the mains cable if it is damaged.
– First, power down the respective mains socket (e.g. via the respective circuit breaker)
and then carefully pull the mains plug from the mains socket.
– Never use the product if the mains cable is damaged.
■
A damaged mains cable may only be replaced by the manufacturer, a workshop com-
missioned by the manufacturer or a similarly qualified person, so as to prevent any
danger.
■
Ensure that cables are not pinched, kinked or damaged by sharp edges.
■
Always lay cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
6.6 Product
Important:
When the end of service light indicator [
Yellow: Service life
] lights up, disconnect the
power supply, remove the product from use, and replace it with a new one.
7 Product overview
1
2
3
4
5
6
7
1
Power cable
2
Alarm speaker
3
Mounting bracket
4
Red: Alarm
/
Green Power
LED
5
Function button
6
Yellow: Service life
LED
7
Gas detection holes