Sybaritic Dermalife RelaxWell Ocean Pod, Owner'S Manual

Page: 55 / 86

Section 8 Service (Hood)
RelaxWell Ocean Pod 50
8.4 Water Connection Types

Type A
– Connection with clamp. For connecting and disconnecting you can use a
screwdriver.

Type B
– Quick connection. To connect, press plastic tube into the female connector
until it hits the bottom. To disconnect, press Quick connections opening ring (see
figure) and pull plastic tube away.
Name Part Number
Clamp E4000-27
Quick connection E4000-29
Modular electrovalves (6 way) E4000-15
8.5 Water Jet

Required tools: screwdriver, large pliers, pipe coil, silicone

Removal:
a. Disconnect tube.
b. Remove fixing nut.
c. Large pliers will probably be
needed for this.

Installation:
a. Place housing through hood
and put silicone as shown in
figure.
b. Tighten fixing nut.
c. Connect tube.

There are 2 pipes on jet housing. 1 is
closed and 1 is open. Be sure that you
connect the tube to the open pipe before tightening.

For cover removal and installation use a screwdriver. It is not necessary to remove
the whole jet.