SY SY-HX150-44-18G, User Manual

Page: 24 / 36

sy.uk 24 V1.0
Using the Built-In Web Interface
The Xcalibur-44 and Xcalibur-88 matrix products have a built-in web-based control interface that
can be accessed from any browser. The factory default setting for the IP settings is with DHCP
on. In case a DHCP server is not available, then the following settings can be used:
Default IP Address: 192.168.1.100
Default Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Telnet Port: 23
TCP/IP Port: 8000
Static/DHCP: DHCP
Do one of the following to obtain the current IP address for the matrix:
1. Press the Menu button until the IP address of the matrix is displayed on the front
panel.
2. Use a serial emulation program to send either the “ r ipconfig! ” or the “ r ip addr! ”
command to obtain all the current IP settings for the matrix.
Note that the screenshots given in this section are for the Xcalibur-88 matrix, the web pages for
the Xcalibur-44 matrix just have fewer options on certain pages.
Login Page
After entering the IP address for the matrix unit, the following login page is displayed requesting
a username and the associated password.
The default passwords are:
Username Default Password Access
Admin admin All pages
User user Status and Video pages only
After entering the password, click on the LOGIN button to open the Status Page.