
MHDBT-88P
sy.co.uk
4
Connection Diagram
Connection Procedure
1.
Connect HDMI sources (e.g. DVD) to HDMI inputs of the MHDBT-88P with HDMI cables.
2.
Connect HDMI displays (e.g. HDTV) to HDMI outputs of the MHDBT-88P with HDMI cables.
3.
Connect speakers/earphones to AUDIO output ports (3-way captive screw connectors).
4.
Connect the HDBT port of HDBT receiver and the MHDBT-88P with Cat5e/6 cable.
5.
Connect the RS232 port (9 pin female D) of the MHDBT-88P with control device, e.g. a PC.
6.
Connect the RS232 port of controlled device to any RS232 port (3p captive screw connector) of
the MHDBT-88P. The control signal can be transmitted bi-directionally.
7.
The MHDBT-88P can be controlled by its built-in IR receiver or through the IR EYE port by
connecting with external IR receiver. The IR signal can also be transmitted bi-directionally
(connect IR OUT port of the MHDBT-88P to IR IN port of a far-end IR device, and connect IR IN
ports of the MHDBT-88P to IR OUT port of the far-end IR device), and in this mode, we can
control the MHDBT-88P remotely.
8.
Note:
The
IR IN
port has built-in infrared carrier receiver.
9.
Connect the 100V~240V AC power adapter to the MHDBT-88P.
System Operations
Front Panel Button Control
Whenever a command is accepted the
indicators of all the buttons pressed will blink green three times
then they will go off. If the command fails then they will go off immediately without blinking.