MHDBT-88P
sy.co.uk
16
Control Far-end Device from Local
Connect the RS232 (3-way captive screw) port in any zone to PC, and connect the controlled RS232 device
(3rd party device) to the corresponding HDBT receiver that is on the same zone as the PC, see below:
Specification
Video Inputs:
8 HDMI
Video Outputs:
4 HDMI and 8 HDBT
HDBT Cable Length:
Up to 70 m when using PoC to SY-HDBT-70PR
Video Standards:
HDMI or DVI-D
Video Input Resolution:
Up to 1920 x 1200@60Hz or 1080p@60Hz
Video Output Resolution
1080p@60Hz
HDCP
Supports HDCP 1.3, auto and manual HDCP management.
EDID Management
Built-in EDID data and manual EDID management
Audio Output
Stereo Analogue and Digital HDMI
Control Interfaces
RS232 and IP
Power Supply
110V ~ 240V AC, 50 / 60 Hz
Power Consumption
Fully Loaded: 117.8 W
Unloaded:
54.4 W
Temperature
-20 ~ + 70
℃
Humidity
10% ~ 90% non-condensing
Weight
5.6 kg
Dimensions (W x H x D)
483 x 44 x 380 mm (1U rack mounting)
Troubleshooting & Maintenance
1.
When there is a colour losing or no video signal output, check hat the cables are properly
connected and are not broken.
2.
If EDID management does not work correctly, check the HDMI cable.
3.
When switching, there is a blank screen on the display, maybe the display does not support the
resolution of the video source. Switch again or use the EDID management to manually set the
resolution of the video source to a compatible output resolution.