18
19
If anonymous access is turned off, you need permission to enter the user name and password. After
using the FTP tool to connect NET20 PLUS, the data appears as follows :
Figure 3-12
3.3.5 Ntrip Server
In this page, the user could set the transmission content and the server for the NET20 PLUS reference
station.
Figure 3-13
3.3.4 Network
This page is mainly set for the data link method used by NET20 PLUS, as shown in fi gure 3-11.
DHCP
:
If the model DHCP is enable, the NET20 PLUS receiver will auto get IP address, otherwise it
uses the static IP.
WIFI hotspot :
After power on WIFI hotspot, then you can use other devices with WIFI function to
search and connect to this NET20 PLUS receiver. The hotspot is named by driver serial. You don’t
need to input password when connect to the WIFI hotspot. Access NET20 PLUS by IP address
192.168.10.1. The hotspot only play the role of control and can’t access internet.
WIFI Client :
When selecting WIFI client, in SSID box input a name of WIFI hotspot can be used for
the search, and in the Password box input the password for connecting to WIFI hotspot, then submit.
After connecting to the connection WIFI, the password can be seen in system terminal or panel
interface (the displayed place will be different in different versions).
Mobile network :
After starting the mobile network, enter the function mode supported by the SIM
card; NET20 PLUS supports 4G netcom. Users can set the user name and password as needed.
Figure 3-11
FTP download :
You can set the parameters of the FTP download. If anonymous access is turned on,
it does not require a user name and password to connect to the NET20 PLUS for FTP downloading.
