26
27
Lightly press power key to confi rm, then enter into “Start Record”, you can see the page shown in
fi gure 4-6.
Figure 4-6
When the static is stopped, the cursor stops at the row of “Start Record”
Transmit Data :
When you transmit data by the panel, fi rst you need to set the transmission parameters
in the WEB UI page, then you can operate the panel. There doesn’t have the transmission parameters
setup on the panel. We can quickly set differential type, start and stop transmit data.
Figure 4-7
Figure 4-3
Figure 4-4
4.2 Quick setting
You can quick set the receiver by the panel key. It includes six parts : start record, transmit the data,
network set, antenna set, other set, and device information.
Start Record :
In the main interface, lightly press F2 key shown in fi gure 4-5.
Figure 4-5
