PROFIL LIGHT 750
User Manual
Model: PL-750
Made in china
IMPORTANT SAFETY INSTRUCTIONS
1. Before you initially start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
2.
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires! Keep away from heaters and other heating sources!
3.
Do not
mount the device on or near combustible sufaces.
Do not
operate the device without a lens
installed.
4. Always hang the device with the color frame retaining clip in the locked position.
5. This device falls under protection-class I, therefore it is essential that the yellow/green conductor gets
connected to earth. The electric connection must be carried out by a qualified employee.
6. Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the
power-cord from time to time.
8. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
9. Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an
extent that their effectiveness is impaired, for example by cracks or deep scratches.
10. Never let the power-cord come into contact with other cables! Handle the power-cord and all connections
with the mains with particular caution!
11. Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power-cord by the plug. Never pull out the plug by tugging the power-cord.
12. During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
13.
DANGER OF BURNING!
Never touch the device during the operation! The housing heats up to the
housing temperature T
SURFACE
.
14. Don't switch the device on and off in short intervals as this would reduce the lamp's life.
15.
HEALTH HAZARD!
Never look directly into the light source, as sensitive persons may suffer an epileptic
shock (especially meant for epileptics)!
16. Keep away children and amateurs from the device!
17. There are no serviceable parts inside the device. Maintenance and service operations are only to be
carried out by authorized dealers.
-6-
Reflector housing
Barrel rotation knob
Lens tube
Color frame
Color frame holder
Retaining clip
Pattern holder slot
Drop-in iris slot
Barrel
Beam focus knob
Shutters
Retainer bolt
Yoke
Insulated handle
Yoke locking knob
Lamp housing
