◊
◊
6
Strawberry Blonde II
Congratulations! Your new Strawberry Blonde™ II
delivers the famous SWR® tone, clarity and true full-
range response that has made SWR® the choice of
professionals for over twenty years. We sincerely thank
you for stepping up to SWR®, and remain committed to
helping you Amplify Your Future™
Strawberry Blonde II™
Same great tone, new upgrades & features!
• NEW upgraded power amp
• NEW Low Z ¼" balanced input option
• NEW Tuning Mute switch
• 90 watts
• 1x10 enclosure w/ tweeter
• Classic SWR acoustic preamp w/ Aural Enhancer™
• 3-band active EQ & phase reverse switch
• Spring reverb
• Headphone jack
• Side-chain effects loop
• 5-Year transferable limited electronic warranty
Optimize this SWR product with:
• SWR Baja Blonde™ extension cabinet
A . MUTE—
Disables all audio output
except
TUNER
OUT {Q}, and HEADPHONES {L}, useful for instrument
changes, tune-ups and when using headphones.
The LED indicates when MUTE is on.
B . INPUT—
Plug your guitar into this jack using
a shielded instrument cable.
C . LOW Z BALANCED—
Press in to configure the
INPUT circuit for low-impedance, balanced-output
guitars (such as the Taylor Expression System™). A
balanced connection offers superior dynamic range
and noise immunity. Use only with a TRS
cable and a balanced output guitar.
D . GAIN—
Adjusts the preamp signal level. Use in
conjunction with the CLIP LED {E} to set the optimal
signal-to-noise ratio. GAIN is also the primary level
control for the BALANCED LINE OUTPUT {R} and
EFFECTS SEND {S} jacks on the rear panel and can
be used to accomodate the input sensitivity of
external equipment, if necessary.
E . CLIP—
Indicates when the preamp, tone circuits or
output buffer are overdriven (cliping) and causing
signal distortion. For the cleanest signal, set GAIN
{D} so that the CLIP LED barely flashes at your
instrument's peak output level.
Front Panel
