Operating Instructions
15
4. Calibration
4.1 Calibration Factor
Range 0.01 ... 9.99
4.2 Calibration Filter
Range 0.1 ... 999.9 s
4.3 Number of Calibration Points
Range 2 ... 20 Auxiliary Points
4.4 Calibration
Range 0.1 ... 999.9 s
4.4.1 Calibration Point 1
Meas. Value
Range of Beginning -
End of Measuring Value
(in phys. Units)
4.4.2 Calibration Point 1 Raw Value
Adjust Initial Value
. . . (depending on the no. of calibration points)
4.4.(2*N) Calibration Point N
Meas. Value
Range of Beginning -
End of Measuring Value
(in phys. Units)
4.4.(2*N+1) Calibration Point N Raw Value
Adjust Initial Value
5. Impulse Output
5.1 Number of Impulses / Mass Unit
Range 0.01 ... 99.9
6. Digital Input
6.1 Digital Input 1
6.1.1 Function
Choose:
None / Totalizer Reset
6.1.2 Direction of Action
Choose: Current / Without Current
6.1.3 Filter Time
Range: 0.1 ... 99.9 s
6.2 Digital Input 2
6.2.1 Function
Choose:
None / Totalizer Reset
6.2.2 Direction of Action
Choose: Current / Without Current
6.2.3 Filter Time
Range: 0.1 ... 99.9 s
7. System
7.1 Baudrate
Choose: 4800 / 9600 / 19200 / 38400
7.2 ModBus-Address
Range: 1 ... 255
7.3 Contrast
Adjust Contrast
7.4 Language
Choose: D / F / E
7.5 Backlight
Backlight Constant = 0
or Delay of Backlight in Minutes
Range 1 ... 99 min
7.6 Temperature Display
Temperature Display On / Off
7.7 Total Counter
Total Counter On / Off
