24
GB
Making a Vacuum Bag
1. Plug in the unit.
2. If there is no vacuum roll bag in the storage area, put one roll in.
3. Open the lid and raise the knife rail.
4. Pull out the required length from the vacuum roll bag then put down the knife
rail.
5. Cut the bag by sliding the knife from one end to the other end.
6. Place and flatten the open end of the
cut bag across the sealing wire.
7. Close and lock the lid by pushing
it down hard at both ends and at
the same time pressing the lock at
both right and left side until a click
is heard.
8. Press the ON/OFF button.
9. Press the Seal button. The machine will start sealing and count down. You can
also press the Cancel button to stop the operation.
10. After the sealing is completed, open the lid and take out the sealed bag.
Before sealing, make sure the opening of the bag to seal is completely
dry.
SFVDB16E_IB_5L_161031_grace.indb 24
31/10/16 10:25 am
