Operating Instructions
www.snopakebrands.com
Insert the electric plug into the power socket.
CAUTION
Do not leave the laminator unattended during lamination.
Turn on the laminator by pressing the
Power On/Off
button and the blue
POWER
light will glow.
The green
READY
light will glow when the laminator is ready for lamination
Prepare the item to be laminated. Insert the item in the lamination pouch and push it right into the sealed
end of the pouch.
The default setting is 2 x 80 micron for copy paper. Press the
Pouch
button to select
the pouch thickness you are using and press the
Paper Type Selection
button to
select the item you are going to laminate. The laminator will adjust the lamination
speed according to your selection.
NOTE
• The pouch thickness on the LCD Panel represents one side thickness of the pouch.
• The maximum lamination thickness is 1.0mm (1000 micron) inclusive of the
lamination pouch and the item to be laminated. For example, if the thickness of the
lamination pouch is 0.1mm (100 micron) per side (total 0.2mm), the item to
be laminated should be less than 0.8mm (800 micron).
1
2
4
5
3
Operation
6
