Operating Instructions
www.snopakebrands.com
Getting Started
Unpack your package. Dispose of the packaging responsibly.
1
Installation of the output tray:
• Insert the output tray into the slot at the back side of the
laminator. Gently push the tray upward until it is locked.
• To remove the output try, release the snap fi t lock and
push the tray downward.
Allow enough clearance behind the laminator. Make sure that the lamination coming out of the laminator is
not blocked.
Decide where to locate the laminator.
CAUTION
Do not locate the laminator:
• Near any heat appliances such as heater or stove
• Directly exposed to sunlight
• In front of an air conditioner
• In a poor ventilated environment
• On a non-level surface
2
4
3
5
