![background image](http://html1.mh-extra.com/html/switel/det087x/det087x_operating-instructions-manual_1415775060.webp)
Operating the Answering Machine Via the Base Station
60
Setting the volume
If the volume of the answering machine is too high or low when playing back messages or listen-
ing−in to incoming calls, it can be adjusted to one of 10 levels.
or
Set the volume
Playing the day and time
The current weekday and time are announced after pressing the
button.
Outgoing messages
Selecting the answering mode
The answering machine is provided with two, pre−recorded outgoing messages. A distinction is
made between
outgoing message with message recording
(OGM 1) and
outgoing message only
(OGM 2). If no other outgoing message is recorded, the pre−recorded outgoing message is
played automatically. When the answering machine memory is full, it automatically reverts to the
outgoing message only
(OGM 2) message explaining to the caller that messages cannot be left.
Proceed as follows to change the answering mode:
2 sec
Activate the outgoing message mode.
Selects OGM 1 (with recording)
or
Selects OGM 2 (without recording)
The outgoing message currently set is then played back.
Recording outgoing messages
Your own outgoing message must be minimally 5 seconds and maximally 1:30 minutes long.
Firstly, select the outgoing message type you want to replace (Page 58). The respective, pre−
recorded outgoing message is replaced by the one you record. The pre−recorded outgoing mes-
sages can be restored simply by deleting your own outgoing message.
2 sec
Activate the outgoing message mode.
or
While the outgoing message is playing, press and hold the
Rewind button (to change OGM 1) or Forward button (to
change OGM 2).
!"# %
Press the button and speak after the acoustic signal. To end
recording, simply release the
or
button.
The new outgoing message is played back.
Playing the current outgoing message
Play the outgoing message
Stop playback
Summary of Contents for DET087X
Page 67: ...Notizen 67 Notizen...